Loading...
Led sensors
SWITCH-OPBOUW
These VOLTRON® LED high-quality surface-mounted sensors are used for cupboard doors and drawers. Detection takes place based on turn on the bidirectional IR beams that are interrupted. It is best to place the sensor as close as possible to the stop of the cupboard door or drawer. SWITCH-OPBOUW : connectable load = max. 96W (advice <85W) - IP20 - HxLxW = 5x10x5mm - color = white - operation up to >180.000 connections - cable lengths: 2m (sensor/controller) + 25cm (controller/power supply and controller/LED). Always 5 years warranty. In combination with VOLTRON® LED strips or LED panels
24V:<96W
20
24V
10CM
1CM
1CM
5
All product specifications for : SWITCH-OPBOUW
Productnumber
SWITCH-OPBOUW
Barcode
LH-926
IP value
20
Voltage
24V
Wattage
24V:<96W
Length
10CM
Width
1CM
Height
1CM
Finish color
White
Cable length
200CM
Constant voltage
Yes
Packed per
1
Full package
50
Specification text with product code
Type : Led sensors / productnumber : SWITCH-OPBOUW LED built-in sensor for surface mounting on cupboard doors and drawers. Detection by means of bidirectional IR beams. Maximum connected load 24V = 96W. White finish color. 2M cord between sensor and controller. Detection eye = 5x10x5mm (HxLxW). Service life of switches> 180,000. 5 years warranty. Merk = Voltron®, producttype : Led sensors, bestelcode=SWITCH-OPBOUWSpecification text without product code
LED built-in sensor for surface mounting on cupboard doors and drawers. Detection by means of bidirectional IR beams. Maximum connected load 24V = 96W. White finish color. 2M cord between sensor and controller. Detection eye = 5x10x5mm (HxLxW). Service life of switches> 180,000. 5 years warranty.
Cable length between sensor and controller is: 2 meters
Cable length between the controller and a power supply connection: 25 cm
Cable length between the controller and the LED connection: 25 cm
Min number of circuits that these sensors can handle = +180,000
The SWITCH CONSTRUCTION and SWITCH -INBOUW is the perfect solution for all possible applications for cabinets, drawers, etc ... by using 1 switch per opening door, this can be perfectly combined with LED strips, aluminum bars 50 cm or the LED panels.
The SWITCH-PIR is the ideal solution for a dressing, the customer comes in and the eye detects the presence and the light comes on. After the eye can no longer detect a detection for 40 seconds, the light will automatically go out.
A point of attention, the controllers may be loaded with MAX 96W, it is recommended to use the 100Watt MeanWell power supply.
It is advisable to remain under 90 Watts to keep the controller under load.
Cable length between the controller and a power supply connection: 25 cm
Cable length between the controller and the LED connection: 25 cm
Min number of circuits that these sensors can handle = +180,000
The SWITCH CONSTRUCTION and SWITCH -INBOUW is the perfect solution for all possible applications for cabinets, drawers, etc ... by using 1 switch per opening door, this can be perfectly combined with LED strips, aluminum bars 50 cm or the LED panels.
The SWITCH-PIR is the ideal solution for a dressing, the customer comes in and the eye detects the presence and the light comes on. After the eye can no longer detect a detection for 40 seconds, the light will automatically go out.
A point of attention, the controllers may be loaded with MAX 96W, it is recommended to use the 100Watt MeanWell power supply.
It is advisable to remain under 90 Watts to keep the controller under load.
Similar products
